| MARK BASS, FORSTERKERE OG HØYTALERE |
MARK BASS nå i Norge!
Mark Bass er en ”liten revolusjon” når det gjelder konstruksjon og lyd.
Ampene er mye lettere enn konkurrentene takket være digitale kretskort på power delen. Dvs. at en 800w topp ikke veier mer enn 3,4 kg.
”Små ampene” som LITTLE MARK på 500w veier KUN 2,9 kg.!!
Det er INGEN konkurrenter i denne kategorien enda.
En 400w Combo m 1 x 12” + tweeter veier ikke mer enn 13,3 kg.
Aldri har det vært morsommere å dra på egen amp. Og for en lyd!
Alle høyttaler elementer er av NEODYMIUM TEKNOLOGI .Det er en mye lettere type høyttalermagnet som halverer vekten på selve elementet . Dette innebærer selvfølgelig at kabinettet også bare veier halvparten av hva et vanlig kabinett veier. MARK BASS har fått B&C høyttaler-fabrikk til å lage en custom serie elemeneter spesialtilpasset sine kabinetter. I kabinettene er det brukt treslaget poppel som gir meget bra lyd og er lett. |
| BASS FORSTERKERE |
Veil.pris |
Vekt kg |
TA 503
 |
500w |
Tube pre-amp,line-out,4-band parametric EQ,VLE,VPF
Spesifikasjoner> |
13 485 |
3,7 |
SA 450
 |
500w |
Line out,low,high,2band parametric eq,VLE.VPF
Spesifikasjoner> |
8 760 |
3,4 |
Little Mark II |
500w |
low.mid low,mid high,high eq,VLE,VPF
Spesifikasjoner> |
7 515 |
2,9 |
LMK
 |
500W |
2-CH Line out (ch-1),low,mid-low,mid-high,high. graphic eq, VLE (ch-2),VPF
Spesifikasjoner> |
10 000 |
2,9 |
TA 501
 |
500w |
tube compressor,line out,low,high,2-band parametric eq, VLE,VPF
Spesifikasjoner> |
13 790 |
3,7 |
SD 800
|
800w |
Line out,low,high,2band parametric eq,VLE.VPF
Spesifikasjoner> |
17 580 |
3,4 |
Little Mark
 |
250w |
low.mid low,mid high,high eq,VLE,VPF
Spesifikasjoner> |
4 850 |
|
|
| BASS KABINETTER |
STANDARD SERIES |
|
|
|
STD 104 HF-4 |
800w 4-ohm |
4x10" cust høyt + Compression Driver, front ported |
11 820 |
29,9 |
STD 104 HF-8 |
800w 8-ohm |
4x10" cust høyt + Compression Driver, front ported |
11 820 |
29,9 |
STD 151 HF |
400w-8ohm |
1x15" cust høyt + Compression Driver,front ported |
8 790 |
29,5 |
STD 102 HF-4 |
400w-4ohm |
2x10" cust høyt + Compression Driver,front ported |
8 485 |
22,6 |
STD 102 HF-8 |
400w-8ohm |
2x10" cust høyt + Compression Driver,front ported |
8 485 |
22,6 |
STD 106 HF |
1200w-6ohm |
6x10" cust høyt + Compression Driver, front ported |
17 880 |
44,6 |
STD 152 HR |
800w-8ohm |
2x15" cust høyt + Compression Driver,rear ported |
13 245 |
32,5 |
STD 151 HR |
400w-8ohm |
1x15" cust høyt + Compression Driver,rear ported |
8 790 |
24 |
STD 104 HR |
800w-4ohm |
4x10" cust høyt + Compression Driver, rear ported |
11 820 |
25,4 |
STD 104 HR |
800w-8ohm |
4x10" cust høyt + Compression Driver, rear ported |
11 820 |
25,4 |
STD 106 HR |
1200w-6ohm |
6x10" cust høyt + Compression Driver, rear ported |
14 850 |
34,1 |
|
|
|
|
|
|
|
|
|
| BASS KABINETTER |
TRAVELER SERIES |
|
|
|
|
|
|
|
|
|
Traveler 121 H
|
400w-8ohm |
1x12" cust høyt + piezo tweeter, rear ported |
6 515 |
15,5 |
Traveler 102 P-4
 |
400w-4ohm |
2x10" cust høyt + piezo tweeter, rear ported |
7 275 |
15 |
Traveler 102 P-8
|
400w-8ohm |
2x10" cust høyt + piezo tweeter, rear ported |
7 275 |
15 |
Traveler 151 P
 |
400w-8ohm |
1x15" cust høyt + piezo tweeter, rear ported |
7 275 |
16,9 |
|
| BASS COMBOER |
|
CMD 121 H |
400w-8ohm |
1x12" cust høyt + compression driver, rear ported |
12 425 |
17 |
MINI CMD 121 P |
400w-8ohm |
1x12" cust høyt + piezo tweeter, rear ported |
11 060 |
18,5 |
CMD 102 P |
400w-8ohm |
2x10" cust høyt + piezo tweeter, rear ported |
13 910 |
20 |
CMD 103 H |
600w-6ohm |
3x10" cust høyt + 1" compression driver, rear ported |
16 215 |
28,7 |
MINI CMD 151 P |
400w-8ohm |
1x15" cust høyt + piezo tweeter, rear ported |
13 640 |
18,5 |
MICRO MARK |
50w -8ohm |
1x6" cust høyt,optional tweeter,line out,phone plug |
5 940 |
|
| CMD 151 P |
400w-8ohm |
JEFF BERLIN SIGN. 1x15" cust høyt + piezo, rear ported |
13 640 |
18,5 |
|
| DIV TILBEHØR |
|
| Bass keeper |
en bårrelås "reim" som fungerer som et slags stativ. |
150 |
|
| Mark Stand |
en bårrelås basert v-kile til å plassere under høyt, tilt |
305 |
|
| Kit Little Mark |
2" rack mounts + 6 skruer for Little Mark 2 & LMK |
165 |
|
| Foot Switch |
fotbryter til LMK, TA 501 & TA 503 |
260 |
|
| Bag Small Size |
Bag til Little Mark 2 & LMK |
1 180 |
|
| Bag Big Size |
Bag til SA 450, TA 501, TA 503, SD 800 |
1 305 |
|
|
TA 503
Til toppen av sida>
INPUTS
PASSIVE INPUT
impedance: 500 Kohm, maximum voltage: 4 Vpp
ACTIVE INPUT
impedance: 500 Kohm, maximum voltage: 10 Vpp
EFFECT RETURN
impedance: 500 Kohm, maximum voltage: 10 Vpp
CONTROLS
GAIN
–80 dB to +35 dB range
MASTER VOLUME
LINE OUT
level control on front panel
PRE/POST EQ (for line out)
switch on rear panel
GROUND LIFT
switch on rear panel
FOOTSWITCH
mute; EQ bypass
EQUALIZATION
LOW
semi-parametric: frequency 40–300 Hz; level ±16 dB
LOW-MID
semi-parametric: frequency 100–800 Hz, level ±16 dB
HIGH-MID
semi-parametric: frequency 700 Hz–6 kHz, level ±16 dB
HIGH
semi-parametric: frequency 1.5–10 kHz, level ±16 dB
VPF (Variable Pre-shape Filter)
center frequency 380 Hz (cut)
VLE (Vintage Loudspeaker Emulator)
250 Hz–20 kHz cut
OUTPUTS
EFFECT SEND
unbalanced, max. voltage 20 Vpp (pre-EQ)
TUNER OUT
unbalanced, max. voltage 2 Vpp
LINE OUT
balanced XLR, max. voltage 15 Vpp
SPEAKER OUT
speakon, 1/4"
OTHER
HEIGHT
2 standard rack units
DEPTH
11.89 in. / 30.2 cm
WEIGHT
8.16 lbs / 3.7 kg
TUBES
1 x EECC81, 1 x ECC83 (JJ Electronic)
OUTPUT POWER
300W RMS @ 8 ohm, 500W RMS @ 4 ohm
POWER REQUIREMENT
100/120V; 230V; 240V
50/60Hz |
SA 450
Til toppen av sida>
INPUTS
INPUT
impedance: 500 Kohm, max. voltage: 9 Vpp
EFFECT RETURN
impedance: 33 Kohm, max. voltage: 12 Vpp
CONTROLS
GAIN
–80 dB to +25 dB range
LINE OUT
level control on front panel
PRE/POST EQ (for line out)
switch on rear panel
GROUND LIFT
switch on rear panel
MASTER VOLUME
EQUALIZATION
LOW
center frequency: 60 Hz; level ±16 dB
LOW-MID
semi-parametric: frequency 100–800 Hz, level ±16 dB
HIGH-MID
semi-parametric: frequency 700 Hz–6 kHz, level ±16 dB
HIGH
center frequency: 4.5 kHz; level ±16 dB
VPF (Variable Pre-shape Filter)
center frequency 380 Hz (cut)
VLE (Vintage Loudspeaker Emulator)
250 Hz–20 kHz cut
OUTPUTS
EFFECT SEND
unbalanced, max. voltage 12 Vpp (pre-EQ)
TUNER OUT
unbalanced, max. voltage 2 Vpp
LINE OUT
balanced XLR, max. voltage 25 Vpp
SPEAKER OUT
speakon, 1/4"
OTHER
HEIGHT
2 rack units
DEPTH
11.9 in. / 30.2 cm
WEIGHT
7.5 lbs / 3.4 kg
OUTPUT POWER
300W RMS @ 8 ohm, 500W RMS @ 4 ohm
POWER REQUIREMENT
100/120V; 230V; 240V
50/60Hz
All models are equipped with Markbass-designed digital power supply circuitry.
Minimum ohm load for all Markbass heads is 4 ohms. |
Little Mark II
Til toppen av sida>
INPUTS
INPUT
impedance 500 Kohm, max. voltage 15 Vpp
BALANCED INPUT (XLR)
impedance 22 Khom, max. voltage 25 Vpp
EFFECT RETURN
impedance 22 Kohm, max. voltage 25 Vpp
CONTROLS
GAIN
–80 dB to +23 dB range
MASTER VOLUME
GROUND LIFT
switch on rear panel
EQUALIZATION
LOW
center frequency: 40 Hz; level: ±16 dB
LOW MID
center frequency: 360 Hz, level: ±16 dB
HIGH MID
center frequency: 800 Hz, level: ±16 dB
HIGH
5 kHz shelf, level: ±16 dB
VPF (Variable Pre-shape Filter)
center frequency 380 Hz (cut)
VLE (Vintage Loudspeaker Emulator)
frequency range 250 Hz–20 kHz (cut)
OUTPUT
LINE OUT
balanced XLR, max. voltage 10 Vpp
EFFECT SEND
unbalanced, max. voltage 20 Vpp (pre-EQ)
TUNER OUT
unbalanced, max. voltage 25 Vpp
SPEAKER OUT
speakon, 1/4"
OTHER
WEIGHT
6.39 lbs / 2.9 kg
DEPTH
10.1 in. / 25.6 cm
WIDTH
10.87 in. / 27.6 cm
OUTPUT POWER
300W RMS @ 8 ohm, 500W RMS @ 4 ohm
POWER REQUIREMENT
100/120V; 230V; 240V
50/60Hz |
LMK
Til toppen av sida>
INPUTS
INPUT A (master)
impedance 500 Kohm, max. voltage 15 Vpp
INPUT B
impedance 500 Kohm, max. voltage 15 Vpp
EFFECT RETURN
impedance 22 Kohm, max. voltage 10 Vpp
CONTROLS
GAIN CH1
–80 dB to +23 dB range
GAIN CH2
–80 dB to +26 dB range
LINE OUT
level control on front panel
GROUND LIFT
switch on rear panel
EQUALIZATION
CH1
LOW
center frequency: 40 Hz; level: ±16 dB
LOW MID
center frequency: 360 Hz, level: ±16 dB
HIGH MID
center frequency: 800 Hz, level: ±16 dB
HIGH
center frequency: 5 kHz; level ±16 dB
VPF (Variable Pre-shape Filter)
center frequency: 380 Hz (cut)
VLE (Vintage Loudspeaker Emulator)
frequency range cut: 250 Hz – 20 kHz
CH2
LOW
center frequency: 60 Hz; level ±16 dB
LOW-MID
center frequency: 360 Hz, level ±16 dB
HIGH-MID
center frequency: 800 Hz, level ±16 dB
HIGH
center frequency: 5 kHz; level ±16 dB
VPF (Variable Pre-shape Filter)
center frequency: 380 Hz (cut)
OUTPUT
LINE OUT
balanced XLR, max. voltage 10 Vpp
EFFECT SEND
unbalanced, max. voltage 20 Vpp (pre-EQ)
TUNER OUT
unbalanced, max. voltage 25 Vpp
SPEAKER OUT
speakon, 1/4"
OTHER
HEIGHT
2 standard rack units
WEIGHT
6.39 lbs / 2.9 kg
FOOTSWITCH
CH1, CH2, CH1+CH2, mute
OUTPUT POWER
300W RMS @ 8 ohm, 500W RMS @ 4 ohm
POWER REQUIREMENT
100/120V; 230V; 240V
50/60Hz
All models are equipped with Markbass-designed power supply circuitry.
Minimum ohm load for all Markbass heads is 4 ohms. |
TA 501
Til toppen av sida>
INPUTS
INPUT
impedance: 500 Kohm, maximum voltage: 9 Vpp
EFFECT RETURN
impedance: 33 Kohm, maximum voltage: 12 Vpp
CONTROLS
GAIN
–80 dB to +25 dB range
LINE OUT
level control on front panel
PRE/POST EQ (for line out)
switch on rear panel
GROUND LIFT
switch on rear panel
COMPRESSION RATIO
1:1 (off) to infinity:1 (limiter)
MASTER VOLUME
EQUALIZATION LOW
center frequency: 60 Hz; level ±16 dB
LOW MID
semi-parametric: frequency 100–800 Hz, level ±16 dB
HIGH MID
semi-parametric: frequency 700 Hz–6 kHz, level ±16 dB
HIGH
center frequency: 4.5 kHz, level ±16 dB
VPF (Variable Pre-shape Filter)
center frequency 380 Hz (cut)
VLE (Vintage Loudspeaker Emulator)
250 Hz–20 kHz cut
OUTPUTS
EFFECT SEND
unbalanced, max. voltage 12 Vpp (pre-EQ)
TUNER OUT
unbalanced, max. voltage 2 Vpp
LINE OUT
balanced XLR, max. voltage 25 Vpp
SPEAKER OUT
speakon, 1/4"
OTHER
HEIGHT
2 standard rack units
DEPTH
11.89 in. / 30.2 cm
WEIGHT
8.16 lbs / 3.7 kg
FOOTSWITCH
mute; EQ bypass
COMPRESSOR TUBE
1 x EECC81 (JJ Electronic)
OUTPUT POWER
300W RMS @ 8 ohm, 500W RMS @ 4 ohm
POWER REQUIREMENT
100/120V; 230V; 240V
50/60Hz |
SD 800
Til toppen av sida>
INPUTS
INPUT
impedance: 500 Kohm, max. voltage: 9 Vpp
EFFECT RETURN
impedance: 33 Kohm, max. voltage: 12 Vpp
CONTROLS
GAIN
–80 dB to +25 dB range
LINE OUT
level control on front panel
PRE/POST EQ (for line out)
switch on rear panel
GROUND LIFT
switch on rear panel
MASTER VOLUME
EQUALIZATION
LOW
center frequency: 60 Hz; level ±16 dB
LOW-MID
semi-parametric: frequency 100–800 Hz, level ±16 dB
HIGH-MID
semi-parametric: frequency 700 Hz–6 kHz, level ±16 dB
HIGH
center frequency: 4.5 kHz; level ±16 dB
VPF (Variable Pre-shape Filter)
center frequency 380 Hz (cut)
VLE (Vintage Loudspeaker Emulator)
250 Hz–20 kHz cut
OUTPUTS
EFFECT SEND
unbalanced, max. voltage 12 Vpp (pre-EQ)
TUNER OUT
unbalanced, max. voltage 2 Vpp
LINE OUT
balanced XLR, max. voltage 25 Vpp
SPEAKER OUT
speakon, 1/4"
OTHER
HEIGHT
2 rack units
DEPTH
11.9 in. / 30.2 cm
WIDTH
19 in. / 48.3 cm
WEIGHT
7.5 lbs / 3.4 kg
OUTPUT POWER
450W RMS @ 8 ohm, 750W RMS @ 4 ohm
POWER REQUIREMENT
100/120V; 230V; 240V
50/60Hz |
Little Mark
Til toppen av sida>
INPUTS
INPUT
impedance 500 Kohm, max. voltage 15 Vpp
BALANCED INPUT (XLR)
impedance 22 Khom, max. voltage 25 Vpp
EFFECT RETURN
impedance 22 Kohm, max. voltage 25 Vpp
CONTROLS
GAIN
–80 dB to +23 dB range
MASTER VOLUME
GROUND LIFT
switch on rear panel
EQUALIZATION
LOW
center frequency: 40 Hz; level: ±16 dB
LOW MID
center frequency: 360 Hz, level: ±16 dB
HIGH MID
center frequency: 800 Hz, level: ±16 dB
HIGH
5 kHz shelf, level: ±16 dB
VPF (Variable Pre-shape Filter)
center frequency 380 Hz (cut)
VLE (Vintage Loudspeaker Emulator)
frequency range 250 Hz–20 kHz (cut)
OUTPUT
LINE OUT
balanced XLR, max. voltage 10 Vpp
EFFECT SEND
unbalanced, max. voltage 20 Vpp (pre-EQ)
TUNER OUT
unbalanced, max. voltage 25 Vpp
SPEAKER OUT
speakon, 1/4"
OTHER
WEIGHT
5.73 lbs / 2.6 kg
DEPTH
10.1 in. / 25.6 cm
WIDTH
10.87 in. / 27.6 cm
HEIGHT
2.8 in. / 7.1 cm
OUTPUT POWER
150W RMS @ 8 ohm, 250W RMS @ 4 ohm
POWER REQUIREMENT
100/120V; 230V; 240V
50/60Hz |
CMD 103 H
Til toppen av sida>
SPEAKER
3x10"
TWEETER
1" compression driver with custom horn
BASS REFLEX
rear
IMPEDANCE
6 ohms
SENSITIVITY
103 dB SPL
SPEAKER POWER HANDLING
600W RMS (AES Standard)
AMP OUTPUT POWER
(analog) 500W @ 4 ohm / 300W @ 8 ohm
PREAMP
solid state
FREQUENCY RESPONSE
40 Hz to 20 kHz
CROSSOVER FREQUENCY
3.5 kHz
WEIGHT
63.3 lbs / 28.7 kg
HEIGHT
27.5 in. / 69.9 cm
WIDTH
23.4 in. / 59.4 cm
DEPTH
18.9 in. / 48 cm |
MINI CMD 121 P
Til toppen av sida>
SPEAKER
1x12"
TWEETER
piezo
BASS REFLEX
rear
IMPEDANCE
8 ohms
SPEAKER POWER HANDLING
400W RMS (AES Standard)
AMP OUTPUT POWER
500W @ 4 ohm / 300W @ 8 ohm
PREAMP:
solid state
FREQUENCY RESPONSE
45 Hz to 18 kHz
CROSSOVER FREQUENCY
3.5 kHz
SENSITIVITY
99 dB SPL
WEIGHT
29.3 lbs / 13.3 kg
HEIGHT
17 in. / 43.2 cm
WIDTH
15.3 in. / 38.3 cm
DEPTH
14.1 in. / 47.9 cm |
CMD 102 P
Til toppen av sida>
SPEAKER
2x10"
TWEETER
piezo
BASS PORT
rear
IMPEDANCE
8 ohms
SENSITIVITY
101 dB SPL
SPEAKER POWER HANDLING
400W RMS (AES Standard)
AMP OUTPUT POWER
500W @ 4 ohm / 300W @ 8 ohm
FREQUENCY RESPONSE
40 Hz to 18 kHz
CROSSOVER FREQUENCY
3 kHz
WEIGHT
44 lbs / 19.9 kg
HEIGHT
18.9 in. / 47.9 cm
WIDTH
23.4 in. / 59.4 cm
DEPTH
18.7 in. / 47.5 cm
PREAMP
solid state
|
CMD 103 H
Til toppen av sida>
SPEAKER
3x10"
TWEETER
1" compression driver with custom horn
BASS REFLEX
rear
IMPEDANCE
6 ohms
SENSITIVITY
103 dB SPL
SPEAKER POWER HANDLING
600W RMS (AES Standard)
AMP OUTPUT POWER
(analog) 500W @ 4 ohm / 300W @ 8 ohm
PREAMP
solid state
FREQUENCY RESPONSE
40 Hz to 20 kHz
CROSSOVER FREQUENCY
3.5 kHz
WEIGHT
63.3 lbs / 28.7 kg
HEIGHT
27.5 in. / 69.9 cm
WIDTH
23.4 in. / 59.4 cm
DEPTH
18.9 in. / 48 cm |
Mini CMD 151 P
Til toppen av sida>
SPEAKER
1x15"
TWEETER
piezo
BASS REFLEX
rear
IMPEDANCE
8 ohms
SPEAKER POWER HANDLING
400W RMS (AES Standard)
AMP OUTPUT POWER
500W @ 4 ohm / 300W @ 8 ohm
PREAMP
solid state
FREQUENCY RESPONSE
40 Hz to 18 kHz
CROSSOVER FREQUENCY
3.5 kHz
SENSITIVITY
100 dB SPL
WEIGHT
40.79 lbs / 18.5 kg
HEIGHT
18.27 in. / 46.4 cm
WIDTH
18.27 in. / 46.4 cm
DEPTH
18.9 in. / 48 cm
|
MICRO MARK
Til toppen av sida>
SPEAKER
1x6"
TWEETER
optional "sattelite" tweeter, not included
IMPEDANCE
8 ohms
SPEAKER POWER HANDLING
50W RMS (AES Standard)
AMP OUTPUT POWER
50W @ 8 ohm
PREAMP:
solid state
FREQUENCY RESPONSE
70 Hz to 8 kHz
SENSITIVITY
100 dB SPL
WEIGHT
9.26 lbs / 4.2 kg
HEIGHT
8.86 in. / 22.5 cm
WIDTH
8.86 in. / 22.5 cm
DEPTH
8.62 in. / 21.9 cm |
CMD 151 P
Til toppen av sida>
SPEAKER
1x15"
TWEETER
none (Jeff doesn't like tweeters!)
BASS REFLEX
rear
IMPEDANCE
8 ohms
SPEAKER POWER HANDLING
400W RMS (AES Standard)
AMP OUTPUT POWER
500W @ 4 ohm / 300W @ 8 ohm
PREAMP
solid state
FREQUENCY RESPONSE
40 Hz to 5 kHz
SENSITIVITY
100 dB SPL
WEIGHT
46.74 lbs / 21.2 kg
HEIGHT
21.93 in. / 55.7 cm
WIDTH
18.27 in. / 46.4 cm
DEPTH
18.9 in. / 48 cm |
|